Discover the new optical lens edger tailored for the optical shops. It simplifies the lens fitting for any frame, even the most complex ones. Update your lab with the most advanced and fast edging technology.
EZ-FIT, edging machine for Rx lenses with manual or automatic block-less loading, provides the same precision and reliability as an industrial lab auto lens edger, with lower prices and a considerably lower footprint. EZ-FIT automatically defines the edging parameters and calculates the edge profile to match lens and frame.
EZ-FIT allows your shop to increase turnover and throughput, reducing mounting time. The edging of any kind of lens with simple or complex shapes is quick, and drilling, grooving, polishing and angled cuts for wrap frames are made easy. EZ-FIT is THE lens edger, perfect for super hydrophobic lens-edging thanks to the zero-force milling process provided by the use of milling tools at all edging stages. EZ-FIT eliminates any manual process and completes the edging in one single step, avoiding any damage due to lens manipulation.
The actual organic lenses are made with highly engineered plastic materials, suitable for any kind of prescription and frame. The surface, hardened with special long lasting coatings, lasts free of scratches for a long time. All traditional optical lens edgers, originally developed for mineral lenses, are not the best solution for fast and precise edging of organic lenses. The EZ-FIT “all-in-one-lens-edger”, has been designed solely for organic lenses. Thanks to the use of milling tools, with EZ-FIT the exceeding material is cut away in big pieces, rather than being grinded down. The milling tool is the best suitable tool for the machining of any kind of plastic material. With EZ-FIT “all-in-one-edger”, it is possible to edge any shape, even the most complex ones, very common in modern eyeglasses. Another advantage of using the EZ-FIT “all-in-one-edger”: the speed. The edging of one lens takes less than one minute.
PRECISION & RELIABILITY
Thanks to the “milling technology”, EZ-FIT “all-in-one-edger” gives perfect sizing and perfect bevel profile.
NO MORE REWORK
With the wheel used by traditional edger, the grinding is performed applying high pressure on the lens, especially on thick lenses. This makes the wheel to react with an opposite force which turns out into imprecision and misshaping of the lens itself.
EZ-FIT “all-in-one-edger” milling technology solves this problem. The milling tool works on the lens cutting away the exceeding material instead of grinding it down, allowing in this way an absolute precision.
The resulting advantage is unnecessary further working and a perfect fitting.
VERY ADVANCED EDGING
Modern eyeglasses are quickly evolving, with new materials, new shapes and new ways to fit the lenses into the frame.
NO MORE DELAYS
In order to adapt traditional grinding machines to these new requirements, several accessories and different outfits have been added, including sports lenses. EZ-FIT “MILLING TECHNOLOGY” is the only one suitable to face the ever evolving market.
The specific features for wrap eyeglasses enable to: – Tilt the milling tool as far as 45degrees in order to match the frame – Use even very small milling tools able to reach the smallest spots – Perform partial steps in order to allow the thick prescription lens to fit into the frames designed for thin lenses
GREEN & AFFORDABLE PROCESS
EZ-FIT “all-in-one-edger” works without using water. No more purifying plant as in the old edger.
NO MORE REJECTS
EZ-FIT “all-in-one-edger” is powered by commonly home available electricity.
With the milling technology you can achieve a significant reduction of the rejects, thanks to the elimination of the cutting force. Less force means less deformation and a much lower error percentage.
Reducing handling and assembling tests then, even possible scratching and break are reduced.
EZ-FIT is available also as automatic lens edger, thanks to the “NoBlock” module.
The “NoBlock” technology allows to performs automatically the centering procedure, avoiding the errors. Thanks to the “NoBlock” module, also available as upgrade, EZ-FIT becomes automatic and can work without application of the edging block.
The “NoBlock” module enables the loading of the next lens while the edger is machining the previous one. Combined with EZ-FIT lens edging machine, the “NoBlock” module leads the operator to place the lens correctly, even without specific optical skills, finding and compensating automatically for any error.
a precise focometer and the Blockless centering for single-vision, bifocal or progressive lenses.
Loading and unloading
totally authomated loading thanks to its dual position loading arm
enabling the EZ-FIT to work non-stop and maximize the productivity
to shape sequentially both lenses, without the operator’s intervention
and very advanced edging, so no more rework and delays
Green & affordable
works without water, no more purifyng plant and strong reduction of the rejects
See our Ez-Fit lens edger video and discover its unique features.
EZ-Fit, lens edger by Meisystem
Contact us for more info about our revolutionary product.
Meisystem, leader in the manufacturing of automatic edging machines for Rx labs, now makes its technology available and suitable for any optical store. Meisystem was the first to introduce an edging process based on milling tools, making the standard grinding system obsolete.
The company know-how, developed producing machinery for the big labs, led to the manufacturing of the first milling edger convenient for optical stores. The outstanding results guaranteed by the milling technology allow for the in-house edging of any kind of lens for any type of frames, with unmatched speed and precision.
Transamérica Expo Center
Rua C3 Pavilhão B Azul
I read Information concerning the processing of personal data, in accordance with article 13 of Legislative Decree no. 196/20003, as reported on this link and, clicking on "submit", I accept registration and use of my personal data.
Scarica il depliant informativo EzFit e scopri i vantaggi della milling revolution!